S E T U P F O R M C H A P T E R 4
Image Reject Sub-Tab
Figure 90: Setup Form - DSP Tab, Image Reject Sub-Tab
Note: Your FLEX-3000 is completely calibrated, including both receive and
transmit image rejection and needs no further adjustments.
Expert
This Expert check box will show controls that you should only consider using if you are an experienced
user. You should proceed with caution. Very rarely, if ever, will you need to access these controls.
[The rest of this page has been left blank intentionally]
85 2003-2009 FlexRadio Systems
To Next Page
Loading...
