FLIR CM174 User Manual

FLIR CM174 USER MANUAL Document Identifier: CM174-en-US_AC
10
In the DCA mode, press to zero the display. In the ACA mode press to
activate or deactivate inrush current mode. Use to confirm (OK) menu
items.
4.4 Display Icons and Indicators
Indicates that the meter is displaying maximum reading values.
Indicates that the meter is displaying minimum reading values.
Indicates that the meter is in Auto range mode.
Indicates that the meter is in Hold mode.
Indicates the battery voltage status.
Indicates that the auto power off function is enabled.
Indicates that the measured voltage is greater than 30 V DC or AC RMS.
Indicates that the meter is measuring AC current or voltage.
Indicates that meter is measuring DC current or voltage.
Indicates that the continuity function is active.
Indicates that the diode test function is active.
Ohm symbol. Unit of measure for Resistance and Continuity.
Unit of measure for current (Amps or Amperes).
Volt. Unit of measure for Voltage.
Farad. Unit of measure for Capacitance.
Hertz. Unit of measure for Frequency.
103 (kilo)
10-3 (milli)

FLIR CM174 Specifications

General

Brand	FLIR
Model	CM174
Category	Measuring Instruments
Language	English