Table of Contents
1. DISCLAIMERS 4
1.1 Copyright 4
1.2 Quality Assurance 4
1.3 Documentation 4
1.4 Disposal of Electronic Waste 4
2. SAFETY 4
3. INTRODUCTION 7
3.1 Key Features 7
4. METER DESCRIPTION 8
4.1 Meter Parts 8
4.2 Function Switch 9
4.3 Function Buttons 9
4.4 Display Icons and Indicators 10
4.5 Thermal Image Display 12
4.6 Clamp Meter Display 12
5. OPERATION 13
5.1 Powering the Meter 13
5.1.1 Auto Power Off 13
5.2 Auto/Manual Range Mode 13
5.3 HOLD Mode 13
5.4 Voltage and Current Measurements 14
5.4.1 Basic Voltage Measurements 14
5.4.2 ‘Lo Z’ Voltage Measurements 14
5.4.3 Basic Current Measurements 15
5.4.4 Extended Functionality Modes 16
5.5 Resistance Measurements 19
5.6 Continuity Test 19
5.7 Capacitance Measurements 20
5.8 Diode Test (CLASSIC mode) 21
5.9 Diode Test (SMART mode) 22
5.10 IGM Thermal Imager 23