FLIR CM174 - Device Specifications; General and IR Thermal Specifications

FLIR CM174 USER MANUAL Document Identifier: CM174-en-US_AC
31
7. Specifications
7.1 General specifications
Display counts: 0~6000
Measuring rate: 3 times per second
Over-range indication: OL or –OL.
Auto power off: Programmable: OFF, 1, 2, 5, or 10 minutes
Low battery indicator: and ‘LO BATT’ is displayed.
Power requirement: 4 × 1.5 V AAA alkaline batteries.
Battery life: Clamp mode Approx. 10 hours; IGMTM Mode 3 hours (with
alkaline batteries and work light off)
Calibration: 1-year calibration cycle.
Operating temperature:
14 to 50°F (-10 to 10°C) (non-condensing)
50 to 86°F (10 to 30°C) (≤ 80% RH)
86 to 104°F (30 to 40°C) (≤ 75% RH)
104 to 122°F (40 to 50°C) (≤ 45%RH)
Storage temperature:
4 to 140°F (-20 to 60°C)
Relative Humidity: 0~80% RH (batteries not installed)
Temperature coefficient: 0.2 × (specified accuracy)/°C, <64.4°F (18°C), >82.4°F (28°C)
Operating altitude: 6562ʹ (2000m)
Jaw opening: 1.38in. (35mm)
Pollution degree: 2
Dimensions: (D × W × L): 1.7 × 3.5 × 9.5 in. (43 × 89 × 241 mm)
Weight: 15.0 oz. (426g) including batteries
Drop test: 6.6 ft. (2 meters)
Agency Approvals: UL, CE, RCM, and KC (MSIP-REI-FS5-CM174)
Over-voltage category: EN 61010-1 CAT IV-600 V, CAT III-1000 V, EN 61010-2-032
CAT
Application field
III
Distribution circuits, machinery, main switching devices close to switchgears,
industrial installations and high current close to distribution circuits
IV
Installation sources, utility transformers, all outside conductors, counters,
protective devices on primary sides and electricity meters