FLIR CM174 User Manual

FLIR CM174 USER MANUAL Document Identifier: CM174-en-US_AC
7
3. Introduction
Thank you for selecting the FLIR CM174 Clamp Meter. The CM174 is a True RMS 600A
AC/DC clamp meter with radiometric Lepton Thermal Imaging system, integrated VFD
Mode, Inrush Current capture and a Lo Z mode for eliminating ‘ghost’ voltages. This
device is shipped fully tested and calibrated and, with proper use, will provide years of
reliable service.
3.1 Key Features
 6000-count color TFT display
 IGMTM (Infrared Guided Measurement) Thermal Imaging System
 Work lights
 Auto Range True RMS AC/DC 600 A capability
 Auto Range True RMS AC/DC 1000 V capability
 Frequency AC bandwidth (45-400Hz)
 Frequency Measurements to 60KHz
 Flex Clamp adaptor input for FLIR TA72_TA74 Clamp adaptors
 Resistance and Continuity measurements
 Capacitance and Diode measurements
 Data HOLD
 Inrush current
 DCA zero function
 Low Z (Impedance) mode
 Minimum/Maximum memory
 Integrated VFD mode (Low-pass filter)
 Auto power off (can be deactivated or preset to 1, 2, 5, or 10 minutes)
 Jaw opening 35mm (1.38”)
 Easy-access battery cover mechanism
 Safety Category Rating: CAT IV-600V, CAT III-1000V

FLIR CM174 Specifications

General

Brand	FLIR
Model	CM174
Category	Measuring Instruments
Language	English