Need help?Do you have a question about the FLIR CM85 and is the answer not in the manual?
General| Continuity | Yes |
|---|---|
| Min/Max/Avg | Yes |
| Inrush Current | Yes |
| Bluetooth | Yes |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -20 °C to 60 °C |
Legal notice regarding content usage, trademarks, and intellectual property.
Details the ISO 9001 certification and commitment to product improvements.
Information on accessing the latest manuals and notifications via the FLIR support website.
Guidance on environmentally friendly disposal of electronic equipment.
General notes and reminders for safe operation and handling of the device.
Critical warnings about potential hazards, shock risks, and misuse of the meter.
General cautions regarding proper usage and potential damage to the device or user.
Regulatory compliance information for FCC rules, including interference guidelines.
Regulatory compliance information for Industry Canada, including interference guidelines.
Highlights the main features and capabilities of the FLIR CM85 power clamp meter.
Identifies and describes the physical components and controls of the meter.
Explains the different positions and functions of the rotary mode selector switch.
Details the purpose and operation of the meter's function buttons (MODE, RANGE, HOLD, etc.).
Explains the meaning of various icons, symbols, and indicators shown on the LCD display.
Describes how the meter indicates when a measurement is outside its specified range.
Instructions for switching the meter on and off, and battery replacement notes.
Explains the automatic power-off feature and how to disable it.
How to select between automatic and manual operating modes for measurements.
How to select between automatic and manual measurement ranges.
How to use the HOLD function to freeze and display a measurement.
Explains the Smart HOLD feature, which beeps and flashes for larger signals.
How to enable or disable the silent mode to suppress audible alerts.
General section for performing voltage and current measurements.
Step-by-step procedure for measuring AC and DC voltage.
Step-by-step procedure for measuring AC and DC current using the clamp jaws.
Overview of advanced measurement modes available on the meter.
How to navigate and activate various measurement modes via the display icons.
How to capture and display peak (max/min) values of AC current or voltage.
Procedure for measuring in-rush current on motor start-ups.
How to use the DC zero function to improve DC current measurement accuracy.
How to measure the frequency of AC voltage or current signals.
How to capture and display minimum, maximum, and average readings.
How to measure total and individual harmonic distortion percentages.
How to use the VFD mode to filter noise in variable frequency drive measurements.
How to use the non-contact voltage detection feature safely.
Procedures for measuring single-phase active power and power factor.
Procedures for measuring single-phase active power and power factor.
How to measure power in three-phase systems.
Steps to measure power in a three-phase, three-wire system.
Steps to measure power in a three-phase, four-wire system.
How to determine the phase rotation sequence in a three-wire system.
Procedure for measuring resistance, with safety warnings.
Procedure for measuring capacitance, including notes on capacitor discharge.
Procedure for performing a continuity test, including beeper indication.
Procedure for testing diodes, including expected readings for good/bad components.
Overview of streaming data to IR cameras or apps via Bluetooth.
General information about Bluetooth capabilities and range.
Steps for pairing and streaming data from the meter.
Specific steps for using the FLIR TOOLS App with the meter.
Guidelines for cleaning and proper storage of the meter.
Detailed instructions for replacing the batteries safely.
Information on the proper disposal of electronic waste.
Lists general technical specifications such as display count, rate, auto power off, and operating conditions.
Provides detailed electrical specifications, including accuracy, overload protection, and input impedance.
Terms and conditions for the FLIR Global Limited Lifetime Warranty.
Terms and conditions for the FLIR Test and Measurement Limited 2 Year Warranty.
To Next Page
