Using the Main Menu13
2. From the Main Menu, click
and then click Setting > Config Backup.
3. Under Device Model, select the USB device.
4. Click the folder with the configuration files you would like to restore. Configuration file
folders are labeled “Config” followed by the time and date the configuration was saved
(e.g. Config_20140425103727).
5. Click Import to restore the system configuration.
6. Click OK to confirm. The system will restart to complete the operation.
13.3.23 Restoring Default Settings
The Default menu allows you to reset the NVR settings to its out-of-the box state. You can
choose to reset all settings at once, or just settings on specific menus. Restoring default
settings does not affect recordings and snapshots saved to the hard drive.
#LX400094; r.43927/43955; en-US
92
To Next Page
Loading...