Back Panel
4
1. Power: Connect the included power adapter.
2. PoE Ports: Connect FLIR network cameras. Integrated PoE (Power Over Ethernet)
ports provide power to cameras and video connection to NVR.
3. LAN: Connect a CAT5 RJ45 Ethernet cable to a router or switch on your network for lo-
cal and remote connectivity.
4. VGA: Connect a VGA monitor (not included) to view the system interface.
5. MIC IN / OUT: RCA input and output for 2–way audio.
6. HDMI: Connect to an HDMI monitor or TV (not included — 4K output supported) to
view the system interface.
7. USB Ports: Connect a USB mouse (included) or connect a USB flash drive (not in-
cluded) for data backup or firmware upgrades.
NOTE
Product image might appear different than the actual product.
#LX400094; r.43927/43955; en-US
7
To Next Page
Loading...