Using the Main Menu13
To configure network warnings:
1. From the Main Menu, click
and then click Event > Warning > Network.
2. Under Event Type, select the event type you would like to configure.
• Net Disconnection: The system has lost connection to the network.
• IP Conflict: More than one device on your network has the same IP address.
• MAC Conflict: More than one device on your network has the same MAC address.
• All: Configure responses for all network events.
3. Configure the following for the selected event type:
• Enable: Check to enable the selected event type.
• Show Message: Check to show a popup message when the selected event occurs.
• Send Email: Check to enable email alerts. Enabling Send Email requires you to
set up email notifications. See 13.3.5 Configuring Email Alerts, page 70) for full
instructions.
• Buzzer: Check to activate the system buzzer.
4. Click OK to save changes.
13.3.13 Storage
The Storage menu allows you to configure the recording schedule and hard drives con-
nected to the system.
13.3.14 Configuring the Video Recording Schedule
You can set a custom recording schedule according to your needs. For example, you can
set the system to record continuously during business hours and record on motion detec-
tion only outside of business hours.
A custom recording schedule helps reduce the amount of hard drive space required, in-
creasing the time your system can retain recordings.
#LX400094; r.43927/43955; en-US
80
To Next Page
Loading...