FLIR DNR214 - Step 2 of 3: Obtain the Systems Local IP Address; Step 3 of 3: Connect to the Systems Local IP Address

DDNS Setup (Advanced)
19
3. Reconnect the power adapter to power the system back on.
19.1.2 Step 2 of 3: Obtain the System’s Local IP Address
1. Right-click to open the Quick Menu and click Info. Enter the system user name (de-
fault: admin) and password (default: 000000).
2. Write down the IP Address of the system.
• A local IP looks something like this: 192.168.5.118.
19.1.3 Step 3 of 3: Connect to the System’s Local IP Address
Follow the steps below to confirm connectivity over a local network on a PC or Mac.
To connect using the system’s local IP address:
#LX400094; r.43927/43955; en-US
180