FLIR DNR214 - Configuration Profiles

Using the NVR On-Screen Display
7
determine whether to use color or black and white mode. Select Black&White for
the camera to use black and white mode at all times.
NOTE
It is recommended to select Auto mode, as using Color mode may impact the camera’s perform-
ance at night.
• Saturation: Adjust the vibrancy of colors in the image.
• Brightness: Adjust the image brightness.
• Contrast: Adjust the image contrast.
• Hue: Adjust the color hue of the image.
3. Click OK to save changes.
NOTE
It is recommended to adjust one setting at a time so you can see the results of each change. Click
Default to reset the camera to default image settings.
7.2.1 Configuration Profiles
Using configuration profiles, you can customize your camera’s Day and Night setting.
There are four configuration profiles, namely:
• Normal: For typical camera conditions and environment. Select Auto under the Day&-
Night dropdown for optimal 24–hour performance.
• Day: For optimal daytime surveillance. Select Color under the Day&Night dropdown
to force your camera to remain in color mode always.
• Night: For optimal nighttime surveillance. Select Black&White under the Day&Night
dropdown to force your camera to remain in black and white mode always.
• Switch By Period: For scheduling regular switch between Day and Night profiles. See
7.2.2 Setting a Day and Night Schedule, page 20 for details.
#LX400094; r.43927/43955; en-US
19