Managing Passwords and User
Accounts
12
By default, the system user name is admin and the password is 000000. Passwords are
enabled by default and are required to access the Main Menu or connect to the system us-
ing a computer or mobile device. You will be prompted to create a new 6 character pass-
word the first time you power up your system.
NOTE
If you forget the password to the system, contact technical support to have it reset.
The system includes the following default account:
• Admin: The admin account has full access to the system, may configure all system set-
tings, and can manage user accounts.
12.1 Changing Passwords
You can change the system password of the admin and user accounts from the User
menu.
To modify an account password:
1. From Live View, right-click and then select Main Menu. If prompted, enter the system
user name (default: admin) and your secure password.
2. Click
and select Setting. Select Account.
3. Under the User tab, click
next to the user account you would like to modify.
4. Check Modify Password.
5. Under Old Password, enter the account’s previous password.
6. Under New Password, enter a new 6 character password for the account. Reenter
the new password under Confirm Password.
#LX400094; r.43927/43955; en-US
45
To Next Page
Loading...