Using the Main Menu13
4. Configure the IP Address, Subnet Mask, and Default Gateway for the internal PoE
switch.
5. Click OK. Click Save to save changes. The system will restart.
13.3.7 Event
The Event menu allows you to configure settings for motion detection, video loss, and sys-
tem warnings.
13.3.8 Configuring Motion Detection
The system supports motion detection on any connected camera. You can determine the
sensitivity as well as the active area for motion detection per channel.
To configure motion detection events:
#LX400094; r.43927/43955; en-US
73
To Next Page
Loading...