FLIR DNR214 - Setting a Day and Night Schedule

Using the NVR On-Screen Display
7
7.2.2 Setting a Day and Night Schedule
You can schedule your camera to automatically switch between day and night mode. Fol-
low the steps below:
1. During Live View, right-click on the channel you would like to configure and select
Camera Setting. If prompted, enter the user name (default: admin) and your secure
password.
2. Click the Configuration dropdown and select Day.
3. Under the Day&Night dropdown, select Color to set the Day Profile to color mode.
4. Click the Configuration dropdown again and select Night.
5. Under the Day&Night dropdown, select Black&White to set the Night Profile to black
and white mode.
#LX400094; r.43927/43955; en-US
20