Basic Setup
5
4. Check the camera (s) you would like to add.
5. Click Add. The status indicator turns green to show the camera is successfully
connected.
NOTE
If the status indicator is red, click
. Update the camera user name, password, ports, and manu-
facturer as needed.
6. Click OK to save changes.
NOTE
You can also add a camera to a specific channel by hovering the mouse over an empty channel in split-
screen view and clicking
. Click Device Search and double-click the camera you would like to add.
Right click to exit.
#LX400094; r.43927/43955; en-US
14
To Next Page
Loading...