FLIR Duo - Page 51

FLI R Duo User Guide
436-0100-01-10, Rev. 200 Duo User Guide
Information on this page is subject to change without notice
46
Mission Param #2
float
Reserved
Ignored
Ignored
2500
MAV_CMD_VIDEO_START
_CAPTURE
Starts video capture
Command Video capture
Mission Param #1
float
Camera ID (0 for all cameras), 1 for first, 2 for
second, etc.
Standard
Standard
Mission Param #2
float
Frames per second
Set video file type
1 = H264
2 = TIFF
Mission Param #3
float
Resolution in megapixels (0.3 for 640x480, 1.3 for
1280x720, etc)
Standard
Ignored
2501
MAV_CMD_VIDEO_STOP_
CAPTURE
Stop the current video capture
Command Video stop capture
Mission Param #1
float
Reserved
Ignored
Ignored
Mission Param #2
float
Reserved
Ignored
Ignored
31010
MAV_CMD_USER_1
User defined command
Set radiometric parameters
Mission Param #1
float
User Defined
Set temperature unit
0 = C
1 = F
Mission Param #2
float
User Defined
Set OSD temperature meter
0 = OFF
1 = Set SPOT_METER to 1
Mission Param #3
float
User Defined
Set Subject Emissivity
50 to 100, inclusive
-999 = Ignore
Mission Param #4
float
User Defined
Set Sky Condition
0 to 100, inclusive
-999 = Ignore
Mission Param #5
float
User Defined
Set Air Temperature
-50 to 327, inclusive
-999 = Ignore