432-0003-00-10 Rev 150 — M-Series Operator’s Manual 29
M-Series System Startup
* Point Mode and Stabilization Mode apply only to the model that supports the
stabilization feature.
High Motor Torque Enabled
High Power Standby Enabled
Home Position
0
o
azimuth, 0
o
elevation
Icon Display Mode Display Minimal
Network Configuration Dynamic
Point Mode* Disabled
Rearview Mode Disabled
Scan Width Wide
Scan Speed Slow
SCENE Button Night Running
Stabilization Mode* Enabled
Stow Position
0
o
azimuth, -90
o
elevation
Thermal Color Default Red
Twist-to-Pan Mode Enabled
USER button (short press) Invert Video Polarity
Video Polarity Red Hot, Black Cold
VIS/IR video signal (dual
payload models only)
IR (Thermal)
TABLE 3.1 Factory Default Settings
Option Factory Default Setting
To Next Page
Loading...
Need help?
General
