432-0003-00-10 Rev 150 M-Series Operator’s Manual 31
CHAPTER 4 M-Series System
Configuration
Overview
This chapter describes how to configure the system options using on-screen
menus. To operate the M-Series camera does not require modifying any of the
factory configuration settings. However, the on-screen menus let you:
• Choose configuration options that match your personal preferences or provide
optimal performance under varying conditions, such as a default color
scheme.
• Enable or disable specialized features such as using the camera in
surveillance mode.
Some settings can be saved and, therefore, are preserved in the case of loss of
power, and some settings will be configured as needed.
Some configuration settings are changed directly by pressing a button on the
JCU. These are described in “JCU Buttons” on page 15. The way some of the
buttons work can be modified using on-screen menus, described in this chapter.
The on-screen menus only appear on the thermal camera video. They do not
appear on the video from the visible camera. If the display is currently visible and
you press the MENU button, the camera switches to IR so the menu can display.
One of the specialized features that can be enabled or disabled with the on-
screen menus is mechanical stabilization. This feature is only supported on one
model (M-618CS). The menus for these options are described in “Mechanical
Stabilization Feature” on page 45.
To Next Page
Loading...
Need help?
General
