432-0003-00-10 Rev 150 — M-Series Operator’s Manual 59
M-Series IP Interface and PC Operations
The system displays a warning as it restarts the network:
When the IP address is changed, the browser window opened under the old IP
address is no longer valid. Type the new static IP address into the browser
address field, or return to Network (Win 7/Vista) or My Network Places (Win XP)
to find the camera. UPnP broadcast is never disabled for M-Series cameras, even
when using a static IP address.
When the camera is in static mode, clicking on the Factory IP Defaults link results
in the following warning.
To Next Page
Loading...
Need help?
General
