FLIR M300 Series User Manual

4.5Typicalsystems
Thecameracanbeconnectedtoavarietyofdigitaloranalogvideosystems,andcontrolled
viaaJCU,awebbrowser,aRaymarinemultifunctiondisplay(MFD),oranycombination
ofthese.
Note:
•Forinformationonhowtoconnecttheproduct,refertothep.45—Connectionsoverview
•Forinformationonavailablecablesandaccessories,refertothe
p.101—Sparesandaccessories
•BasicWebbrowsersystem:Y oucanconnectthecameradirectlytoanIP-capabledevice,
suchasalaptoporPC,usingthesuppliedRayNetcableandRayNet-to-RJ45adapter
cable.Y oucancontrolthecamerathroughtheuserinterface,accessibleviaawebbrowser.
•BasicdigitalvideodisplaysystemwithJCU:Y oucanconnectthecameradirectlytoa
primarydigitalvideodisplayviathecamera’sHD-SDIoutputandthesuppliedBNCcable,
orviaHDMIusingasuitablethird-partyvideoconverter(availableseparatelyfroman
electronicsretailoutlet).
•BasicanalogvideodisplaysystemwithJCU:Y oucanconnectthecameradirectlytoa
primaryanalogvideodisplayviathecamera’scompositeanalogvideooutputusingthe
BNCconnectoronthecamera’spowercable.
•BasicWebbrowsersystemwithJCU:YoucanconnecttheproducttoanIP-capable
device,suchasalaptoporPC,viaanEthernetswitch(usingthesuppliedRayNetcable
andRayNet-to-RJ45adaptercable),andanadditionalEthernetcable.Y oucancontrol
thecamerathroughtheuserinterfaceaccessibleviaawebbrowser,orwithaJCU
unit,alsoconnectedtotheEthernetswitch.
•BasicRaymarineLightHouse3multifunctiondisplay(MFD)system:Y oucanconnect
theproductdirectlytoaRaymarineLightHouse3MFDusingthesuppliedRayNetcable.
Y oucancontrolthecameradirectlyusingtheMFD.Foramoreexiblesystem,youcan
installaRayNetswitchbetweenthecameraandtheMFD,andaddaJCUunit(also
connectedtotheRayNetswitch)toprovideadditionalcameracontrols.
•Complexsystemwithmultiplecameras,MFDs,andJCUs:WithsufcientRayNetor
Ethernetportsavailableoninstalledswitches,andappropriateRayNetandEthernetcables,
youcanconnectmultiplecameras,MFDs,andJCUstogethertoformanintegratedsystem.
Y oucanuseanyJCUorMFDtocontrolandmonitoranycamera.
4.6Networkconnections
Y ourcamerahasasingleRayNetnetworkconnector.Thisconnectsthecameratoyour
vessel’swiderIPnetwork.Thiscouldbeanexistingthird-partyEthernetnetwork,ora
dedicatedRaymarineRayNetnetwork.
Thedetailsofthenetworkconnectionsbetweenthecamera,videodisplay(webbrowser,
videomonitor,orLightHouse3Raymarinemultifunctiondisplay),controlunit(forexample,a
JCU-2controller)andtherestofyourinstallationdependon:
•Howyouwanttocontrolthecamera(forexample,withawebbrowser,aLightHouse3
Raymarinemultifunctiondisplay,aJCUcontroller,oracombination).
•Howyouwanttoviewthecamera’sIPvideofeed(forexample,viaalaptop/PCorviaa
LightHouse3Raymarinemultifunctiondisplay,oracombination).
•theequipmentalreadyinstalledonyourvessel(forexample,networkswitcheswithfree
ports,orothercameras).
Thefollowingsectionsshowsomepossiblenetworkconnections,startingwithabasicsystem
withasinglecameradirectlyconnectedtowebbrowser,andnishingwithamorecomplex
multi-camera,multi-display,multi-JCUsystem.
Connections51

FLIR M300 Series Specifications

General

Thermal Sensor	Uncooled VOx Microbolometer
Pan/Tilt	360° continuous pan, +/- 90° tilt
IP Rating	IP66
Frame Rate	30 Hz
Input Voltage	12-24 VDC
Spectral Range	7.5 - 13.5 µm
Operating Temperature	-25°C to +55°C
Thermal Sensitivity	<50 mK
Focus	Automatic
Resolution	640 × 512 (M364), 320 × 256 (M332)