FLIR M300 Series User Manual

Y oucansetthehomepositionasrequired,andreturnthecameratothehomeposition,using:
•thecamera’swebbrowserinterface:seep.75—Webinterfaceoperation
•aJCUremotekeypad:seep.82—JCU–2controlsoverview
•acompatibleRaymarineMFD:seethe“Videoapp”applicationsectioninthedocumentation
suppliedwithyourMFD.
Surveillancemode
Insurveillancemodethecameracontinuouslypansleftandright,automaticallyscanning
thescene.
Thecameracontinuesscanninguntilyou:
•disablesurveillancemode
•manuallypanortiltthecamera
•commandthecameratomovetoitshomeposition
Anyoftheseactionsstopssurveillancemode;surveillancemodedoesnotresumeuntil
youre-enableit.
Y oucancontrolsurveillancemode,includingthescanspeedandscanwidth,using:
•thecamera’swebbrowserinterface:seep.75—Webinterfaceoperation
•theuserprogrammablebuttonsonaJCUremotekeypad:see
p.84—ConguringJCU-2user-programmablebuttons(UPBs)
•acompatibleRaymarineMFD:seethe“Videoapp”sectioninthedocumentationsupplied
withyourMFD.
74

FLIR M300 Series Specifications

General

Thermal Sensor	Uncooled VOx Microbolometer
Pan/Tilt	360° continuous pan, +/- 90° tilt
IP Rating	IP66
Frame Rate	30 Hz
Input Voltage	12-24 VDC
Spectral Range	7.5 - 13.5 µm
Operating Temperature	-25°C to +55°C
Thermal Sensitivity	<50 mK
Focus	Automatic
Resolution	640 × 512 (M364), 320 × 256 (M332)