5. With the numeric adjust control displayed, select
the on-screen Up and Down arrows to adjust the
alarm threshold value, or
6. To use the numeric keypad:
i. Select on the actual value or the keypad icon.
The numeric keypad is displayed.
ii. Use the on-screen keypad to enter the desired
value for the alarm threshold.
iii. Select OK to save the new value for the alarm
threshold.
iv. You can also change the unit of measure
for the alarm threshold you are currently
changing by selecting on the relevant unit of
measure from the numeric keypad.
Clearing the alarm history
You can view the history of alarm events from the
Alarm Manager.
From the Homescreen:
1. Select Set-up.
2. Select Alarms.
The Alarm Manager is displayed.
3. Select History.
The alarm history is displayed.
4. Select Clear alarm history.
A conrmation message is displayed.
5. Select Yes.
The alarm history is deleted.
The alarm history is also cleared if a Systems and
Data Reset is performed.
108
To Next Page
Loading...