FLIR RAYMARINE A98 - Range Shift; Sidevision TM Range; Sidevision TM Range in and out; Sidevision

Controls
Multifunction
displays
Range in and
Range out buttons
• c Series
• e Series
(excluding e7
and e7D
• RMK-9 keypad
Slide the screen
Up or Down
• a Series
• e Series
• gS Series
• eS Series
Range shift
The Range Shift function enables a specic area of
the water column to be displayed on-screen.
In the below example the top 20 feet of the water
column is not displayed
Using range shift
The default setting adjusts the display to keep the
bottom in the lower half of the screen. Alternatively
you can shift the image within the current range.
From the application menu, with Range set to
Manual:
1. Select Range.
2. Select Range Shift.
The range shift dialog is displayed.
3. Adjust the setting to the required value.
You will see the range changing on the screen as
you adjust the setting.
4. Select Back or press the OK button to conrm
the setting and close the range shift dialog.
15.13 SideVision
TM
Range
The SideVision
TM
Range function enables you to
dene the distance to the left and right of the vessel
that is displayed on-screen. The range displayed
on-screen can be adjusted to suit your needs.
The table below shows examples of the
SideVision
TM
Range function.
SideVision
TM
channel
Ranged Out
Ranged In
SideVision
TM
Range in and out
The method of ranging in and out of a Sonar
application displaying SideVision
TM
is shown below.
The table below shows the Range controls available
for each display variant.
Controls
Multifunction
displays
Rotary Control • eS Series
Rotary Control • c Series
• e Series
• RMK-9 keypad
Range in and
Range out buttons
• c Series
• e Series
(excluding e7
and e7D
• RMK-9 keypad
Range in and
Range out
on-screen icons
• a Series
• e Series
• gS Series
• eS Series
Sonar (Fishnder) application
223