Description Functions
7
WPT / MOB
• Press and release to access the
waypoint options. Press again to place
a waypoint.
• Press and hold to place a Man
Overboard (MOB) marker at your
current position.
8 Power
• Press once to switch the unit ON.
• Once powered on, press the Power
button again to adjust the brightness,
perform a screen capture, access
Powersave mode or access the power
controls for external devices.
• Press and hold to switch the unit OFF.
9
Card reader
slot
Open the card door to insert or remove
a MicroSD card. There are 2 card slots
(labelled 1 and 2), used for electronic
charts and archiving waypoint, route,
track and settings data.
10 Pilot • Press to disengage integrated
autopilot.
• Press and hold to activate Auto mode
on integrated autopilot.
11
Switch
Active Pane
• Press to switch the active pane in
splitscreen pages.
• Press and hold to expand the selected
pane to fullscreen.
UniControl
Non-touch, HybridTouch and the remote keypad
include a UniControl which consists of Rotary,
Joystick and a push button control.
1. Rotary — use this to select menu items, move
the on-screen cursor, and adjust the range in the
Chart and Radar applications.
2. Direction controls / Joystick — use this to
move the cursor position in applications, pan up,
down, left and right in the Chart, Weather and
Sonar applications or to cycle through datapages
in the Data application.
3. OK button — push the end of the joystick to
conrm a selection or entry.
eS Series Controls
32
To Next Page
Loading...