FLIR RAYMARINE A98 - Taking a Photo Using a Remote Control; Onscreen Icons

1. Select Menu.
2. Select Photos.
3. Select Timer.
4. Select Time Delay.
A list of time intervals is displayed:
• 5 s
• 10 s
• 30 s
5. Select a time interval from the list.
6. Select Start Timer.
The photo will be taken after the time delay
specied has elapsed. A conrmation dialog is
then displayed showing a preview of the photo
taken.
7. Select OK to conrm.
8. Select View to view the photo fullscreen.
9. Select Delete to delete the photo.
Taking a photo using a remote control
To take a photo using a Raymarine wireless remote
control as the trigger follow the steps below.
If saving to a memory card ensure that a memory
card with sufcient space is inserted into the relevant
card reader slot.
1. Ensure that your wireless Raymarine remote
control is paired to the multifunction display and
working.
2. From the Camera application, select Menu.
3. Select Photos.
4. Select Remote.
The Remote dialog is displayed.
5. Press any button on the connected remote
control to take a photo.
The photo is saved and a conrmation dialog is
displayed showing a preview of the photo.
6. Select OK to conrm.
7. Select View to view the photo fullscreen.
8. Select Delete to delete the photo.
Onscreen icons
On Touchscreen multifunction displays you can touch
anywhere on the screen to display the onscreen
icons
The onscreen icons can be used to start / stop
recording or to take a picture.
Record icon
Stop Recording icon
Take Photo icon
The onscreen icons will close after 5 seconds.
Using the onscreen icons
1. Select the Record icon to start recording.
2. Select the Stop recording icon to stop the
recording.
3. Select the Take Photo icon to capture a still
image.
298