3.2 Controls
a Series Controls
Descrip-
tion Functions
1 Touch-
screen
Touch the screen to operate functions,
including all menu operations.
2 Power
• Press once to switch the unit ON.
• Once powered on, press the Power
button again to open the shortcuts page
where you can adjust the brightness,
perform a screen capture, access
PowerSave mode or access the power
controls of external devices.
• Press and hold to switch the unit OFF.
• If an integrated pilot is engaged, press
and hold to put the autopilot into
STANDBY mode.
3
Card
reader slot
MicroSD card reader
• a6x and a7x = 1 x MicroSD card slot
• a9x and a12x = 2 x MicroSD card slots
e7 / e7D Controls
Description Functions
1 Touch-
screen
you can touch the screen to operate many
common functions, including all menu
operations.
2 Menu Accesses menus. Press again to close
menus.
3
UniControl
Provides a joystick, rotary control and
an OK push button for using menus and
applications.
Description Functions
4 Back Press to return to a previous menu or
dialog level.
5
WPT / MOB
• Press and release to access the
waypoint options. Press again to place
a waypoint.
• Press and hold to place a Man
Overboard (MOB) marker at your
current position.
6 Power
• Press once to switch the unit ON.
• Once powered on, press the Power
button again to adjust the brightness,
perform a screen capture, access
Powersave mode or access the power
controls for external devices.
• Press and hold to switch the unit OFF.
• If an integrated pilot is engaged,
press and hold put the autopilot into
STANDBY mode.
7
Card reader
slot
Open the card door to insert or remove
a MicroSD card. There are 2 card slots
(labelled 1 and 2), used for electronic
charts and archiving waypoint, route,
track and settings data.
c95 / c97 / c125 / c127 / e95 / e97 / e125
/ e127 / e165 Controls
Description Functions
1 Touch-
screen
you can touch the screen to operate
many common functions, including all
menu operations.
2 Home Press to return to the homescreen.
3 Menu Accesses menus. Press again to close
menus.
4
UniControl
Provides a joystick, rotary control and
an OK push button for using menus and
applications.
5
Back Press to return to a previous menu or
dialog level.
6 Range
In/Out
Press minus (-) to range out and plus (+)
to range in
Getting started
31