FLIR RAYMARINE A98 - 18.10 Record and playback

18.10 Record and playback
The Camera application can be used to record live
IP camera feeds from a connected IP camera. The
recording can then be played back at any time.
The camera application records IP camera feeds in
.mp4 format which can be saved to a memory card
or to the display’s internal storage.
The Camera application titlebar displays the name
of the feed being recorded and a recording timer is
displayed onscreen that shows the elapsed time.
Recording an IP camera feed
To record the feed from an IP camera follow the
steps below.
From the Camera application:
1. Select Menu.
2. Select Videos.
3. Select Record.
The recording will start.
Whilst the camera application is recording you can
use your multifunction display as normal e.g. view a
different camera feed, go back to the Homescreen,
or open a different application. The selected feed will
continue to record until stopped or until the memory
of the selected location is full.
Note: On a touchscreen display you can also start
a recording using the onscreen icons. Refer to
Onscreen icons.
Approximate record times
The approximate record times are dependant on IP
camera resolution and settings, lighting conditions
and available storage space.
The CAM200IP, set to factory default settings, can
record at an approximate rate of 22.5 MB per minute;
allowing up to 44 minutes of record time per 1 GB of
available storage space.
Note: Recordings and images can be saved to the
MFDs internal storage, refer to the
Internal storage
section for approximate available storage.
Internal storage
Multifunction displays (MFDs) include internal
storage that can be used to store recorded video
and photos taken using the Camera application. The
table below shows the approximate available internal
storage space for LightHouse
TM
powered MFDs.
MFD variant
Approximate
available internal
storage
Approximate
record time
(CAM200IP)
a Series 2 GB
88.8 minutes
c Series 2 GB
88.8 minutes
e Series
(excluding e165)
2 GB
88.8 minutes
e165
6 GB
266.6 minutes
gS Series 14 GB
622.2 minutes
eS Series 6 GB
266.6 minutes
Note:
• The available internal storage stated above is
based on MFD manufactured after May 2014.
Available storage on displays manufactured
prior to this date may vary.
• Available internal storage space is subject to
change without prior notice.
• The approximate record times stated above
were taken using a CAM200IP set to its default
resolution of 720p. Increasing image resolution
and other factors such as lighting conditions
may affect the resulting lesize and therefor
reduce the available record time.
Stop recording
Recording can be stopped at any time.
From the Camera application:
1. Select Menu.
2. Select Videos.
3. Select Stop.
The File is saved and the Video Saved
conrmation dialog is displayed.
4. Select OK to conrm, Play to playback the
recorded le or Delete to delete the le.
The conrmation dialog will automatically close
after 5 seconds.
Playing back a video le
You can playback video clips using the Camera
application.
From the Camera application:
1. Select Menu.
2. Select Videos.
3. Select View.
The My Files browser is opened.
4. Locate the Video le you want to view.
Video les stored on internal storage are saved
in Internal > User Data > Video les.
296