FLIR RAYMARINE A98 - Checking the Sonar

4. Select Speed Transducer.
A list of transducers is displayed.
5. Select your speed transducer from the list.
15.5 Checking the sonar
1. Select a Sonar application page from the
Homescreen.
2. Check the Sonar display.
With the Sonar active you should see:
• Depth reading (indicates the transducer is
working). The depth is shown in a databox in
the bottom left of the screen.
If the databox is not present it can be turned
on from the Presentation menu: Menu >
Presentation > Databoxes Set-up.
214