22.4 Selecting an audio source
An audio source can be assigned to each zone
individually. The audio sources that are available
depend on the entertainment system you are using.
For information on connecting the different audio
sources to your Entertainment system please
refer to the documentation that accompanied your
entertainment system.
From the Audio application:
1. Select the Zone that you want to assign the audio
source to.
2. Select the Audio Source button.
The Audio Sources page is displayed:
3. Select the relevant button for the desired audio
source.
The selected audio source will start to play on
the selected zone:
4. Repeat the above steps for each Zone/Audio
Source.
Restrictions apply to some audio sources.
Audio source zone restrictions
Depending on your Entertainment system, you may
be restricted from assigning a source to a zone.
Some sources will not be available in all geographic
locations. For more information, refer to the
documentation that accompanies your audio
equipment.
Note: When changing the audio source for a zone,
other zones may also change their source, if the
change violates the restrictions listed below:
Zone 1 set to: Subsequent zones can be set to:
AM Radio
AM Radio / SiriusXM / Pandora / Aux
/ USB / Bluetooth
FM Radio
FM Radio / SiriusXM / Pandora / Aux
/ USB / Bluetooth
Weather
Weather / SiriusXM / Pandora / Aux
/ USB / Bluetooth
SiriusXM AM Radio / FM Radio / Weather /
SiriusXM / Pandora / Aux / USB /
Bluetooth
Pandora
AM Radio / FM Radio / Weather /
SiriusXM / Pandora / Aux
Aux
AM Radio / FM Radio / Weather /
SiriusXM / Pandora / Aux / USB /
Bluetooth
USB AM Radio / FM Radio / Weather /
SiriusXM / Aux / USB
Bluetooth
AM Radio / FM Radio / Weather /
SiriusXM / Aux / Bluetooth
Audio application
339
To Next Page
Loading...