FLIR RAYMARINE A98 - External Devices Menu

External devices menu
This menu enables you to congure the external devices connected to the display.
Menu item Description Options
Pilot Set-up
When connected to an Evolution autopilot
this option allows you to enable and
disable pilot control and the pilot bar. You
can also access certain pilot settings and
modes.
AIS Unit Set-up Enables you to congure additional
functions for AIS units, such as Silent
Mode. This menu item is only available
when an AIS unit is detected or when
Simulator mode is On.
For an explanation of these options refer
to the AIS menu options described in the
AIS section of this document.
Quantum Radar Enables pairing with a Quantum Radar
scanner over Wi-Fi
• Pair with Quantum Radar
Remote Control
Enables you to customize certain controls
for Raymarine Bluetooth remote control
units (for example, RCU-3).
For an explanation of these options refer
to the Remote Control section of this
document.
Transducers Set-up Displays a list of connected transducers
which you can select and calibrate.
Weather Set-up
Enables you to select your Raymarine
weather receiver:
• SR6
• SR50
• SR100
• SR150 (default)
Switch Panel Set-up
Enables you to install and uninstall
Switch Panel conguration les.
External Keypad Enables you to pair and unpair remote
keypads.
Engines Set-up
Enables you to run the engine
identication wizard.
For an explanation of these options refer
to Engine identication wizard section of
this document.
Customizing your display
79