Example warning message Description Resolution
The start and end point of the desired
route are further than 100 nm apart.
Create smaller route legs. e.g. instead
of trying to create a route from point A
to point B, create a route from point A
to point B to point C to point D, this will
enable a route longer than 100 nm to be
created for each route leg.
A safe route could not be generated
The rst waypoint will be placed but the
end waypoint will not.
Check the chart area along the expected
route to identify areas which cannot be
navigated through due to obstacles or
land mass.
Troubleshooting
389
To Next Page
Loading...