Software version
Applicable product
manual
Multifunction displays
compatibility Changes
V5.27 81337–5
a65 / a67 / c95 / c97 /
c125 / c127 / e7 / e7D /
e95 / e97 / e125 / e127 /
e165
• Addition of Fuel Manager including: Estimated
fuel remaining, distance to empty and time to
empty calculations, fuel used and fuel economy
data, fuel range rings in the Chart application
and low fuel alarm).
• Addition of Document (pdf) Viewer application.
• Addition of Slew to Cue (Auto slew thermal
camera to AIS, MARPA or MOB targets).
• Support for multiple thermal camera JCUs.
• Thermal cameras OSD menu options now
available directly from Thermal Camera
application’s menu.
• Video application now called Camera
application.
• Support for networked IP cameras in the
Camera application.
• Ability to automatically cycle through available
video / camera feeds in the Camera application.
• Support for up to 5 engines in the Data
application.
• Improved engine data selection in the Data
application.
• Support for detailed engine warning alarms.
• Addition of on-screen range controls to the
Weather application
• Ability to view images saved to MicroSD card
from the homescreen My Data menu.
• Addition of Demo Video mode for retail.
• Ability to record live bus messages (NMEA
0183 and SeaTalk
ng
to MicroSD card.
V4.32 81337–4
c95 / c97 / c125 / c127
/ e7 / e7D / e95 / e97 /
e125 / e127
• Addition of on-screen range controls to the
Chart & Radar applications.
• Addition of on-screen Gain, Rain & Sea
controls to Radar application.
• Addition of on-screen Gain & TVG controls to
Sonar application.
• Addition of slider bar control adjustment.
• Addition of new numeric adjustment controls.
• Improved Power Key shortcuts to Brightness
and Capture Screen image options
V3.15 81337–3
c95 / c97 / c125 / c127
/ e7 / e7D / e95 / e97 /
e125 / e127
• Added support for Raymarine CP450C CHIRP
Sonar Module.
• Added support for AIS feature support
for STEDS EAIS integration & display of SAR
aircraft & SART devices.
• Added limited support for Sirius Marine
Weather Module.
• Added Standby / PowerSave Mode.
• Added support for RayRemote and RayControl
Applications.
422