Handling the camera11
11.11 Moving files to a computer
11.11.1 General
When you save an image or video clip in the image archive of the camera, the file is stored
on the memory card.
You can connect the camera to a computer, using a USB-C to USB-A or a USB-C to USB-
C cable. Once connected, you can move the image and video files from the memory card
to the computer.
11.11.2 Procedure
Follow this procedure:
1. Open the cover for the connector compartment at the bottom of the camera.
2. Connect a USB cable to the USB-C connector in the connector bay. Connect the other
end of the USB cable to the computer.
3. Turn on the camera.
4. Do one of the following:
• Move the files to the computer using a drag-and-drop operation in Microsoft Win-
dows Explorer.
Note Moving a file using a drag-and-drop operation does not delete the file in the
camera.
• Import the images into FLIR Tools/Tools+ or FLIR Report Studio.
Note When closing the cover for the connector compartment, firmly press along the
edges of the cover to make sure that it closes tightly.
11.12 Assigning functions to the programmable
buttons
11.12.1 General
There are two individually programmable buttons: one above the screen and one at the
bottom of the optics housing.
#T810253; r. AA/42549/42549; en-US
37
To Next Page
Loading...
