FLIR T530 - Related Topics; Zooming an Image; General

Saving and working with images
12
5. On the top toolbar, select the
icon and push the navigation pad.
6. On the right toolbar, select the
icon and push the navigation pad. This opens the
image in edit mode.
7. Manual image adjustment mode is now active. For image adjustment instructions, see
section 14.3 Adjusting the infrared image, page 56.
8. Push the navigation pad. This displays a context menu.
• Select
(Cancel) to exit edit mode.
• Select
(Measurement parameters) to change the global parameters.
• Select
(Image mode) to change the image mode.
• Select
(Measurement) to add a measurement tool.
• Select
(Color) to change the color palette or set a color alarm.
• Select
(Save) to save and exit edit mode.
12.5.3 Related topics
• 14.6 Changing the measurement parameters, page 61.
• 15 Working with image modes, page 64.
• 16 Working with measurement tools, page 68.
• 14.5 Changing the color palettes, page 60.
• 17 Working with color alarms and isotherms, page 78.
12.6 Zooming an image
12.6.1 General
You can zoom an image by using the camera’s digital zoom function. You can do this on
live images and on saved images in edit mode.
The digital zoom factor is displayed at the top of the screen.
#T810253; r. AA/42549/42549; en-US
48