Fluke 183 - Certifications and Compliances

183 & 185
Users Manual
44
Table 25. Certifications and Compliances
Category Standards or description
EC Declaration of Conformity
– EMC
Meets intent of Directive 89/336/EEC for
Electromagnetic Compatibility.
Compliance was demonstrated to the
following specifications as listed in the
Official
Journal of the European Communities:
EN 61326 Class A
1,2
Australia/New Zealand
Declaration of Conformity –
EMC
Complies with EMC provision of Radio
communications Act per the following
standard(s):
AS/NZS 2064.1/2 Class A Radiated
Emissions
EC Declaration of Conformity
– Low Voltage
Compliance was demonstrated to the
following specification as listed in the
Official Journal of the European
Communities:
Low Voltage Directive 73/23/EEC as
amended by 93/69/EEC.
EN 61010-1/A2:1995
Safety requirements for electrical
equipment for measuring control, and
laboratory use.
U.S. Nationally Recognized
Testing Laboratory Listing
ANSI/ISA S82.01-1994
CAN/CSA C22.2 No. 1010.1
Safety requirements for electrical
equipment for measurement, control,
and laboratory use
Additional Compliance IEC61010-1/A2:1995
Safety requirements for electrical
equipment for measurement, control,
and laboratory use.