Fluke 190-104 - Chapter 3; Introduction; How to Obtain Parts; Title Page

List of Replaceable Parts
3.1 Introduction 3
3-3
3.1 Introduction
This chapter contains an illustrated list of replaceable parts for the models Fluke 190-
104/190-204 ScopeMeter test tools. Parts are listed by assembly; alphabetized by item
number or reference designator. Each assembly is accompanied by an illustration
showing the location of each part and its item number or reference designator. The parts
list gives the following information:
• Description
• Ordering code
Caution
Electrical components and in particular active components
such as IC’s, transistors and diodes may be damaged by static
discharge.
Handling and servicing static sensitive components and
assemblies should be done only at a static free workstation by
qualified personnel.
3.2 How to Obtain Parts
To locate an authorized service center refer to the second page of this manual (back of the
title page).
In the event that the part ordered has been replaced by a new or improved part, the
replacement will be accompanied by an explanatory note and installation instructions, if
necessary.
To ensure prompt delivery of the correct part, include the following information when
you place an order:
• Instrument model (for example Fluke-190-204), 12 digit instrument code (9444 ...
....), and serial number (15500001). The items are printed on the type plate on the
bottom cover.
• Ordering code
• Description
• Quantity