l
Tap 'Flange' to access the "Flange details" screen where the flange may be edited.
l
Tap the 'Shape' area [1] to select the shape of the flange from the pop-up menu [2] that
appears. In the above example, the selected shape of the flange is "Circle".
l
Tap the 'Layout' area [3] to select the pattern formed by the bolts from the pop-up
menu that appears.
l
Tap the respective value boxes then use the onscreen keyboard to enter flange dimen-
sions and bolt pattern lengths. To edit number of bolts, tap [1] then enter the value dir-
ectly. After dimensions have been entered, tap the displayed flange area [2]to close the
onscreen keyboard.
l
After all the required dimensions have been entered, tap to proceed to measure.
This measurement procedure is used for vertical flanged machines:
"Vertical flanged machines – Static clock" on page103
102 Version:1.0
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
