To Next PageTo Next Page
Need help?Do you have a question about the Fluke 8808A and is the answer not in the manual?
General| Product type | Digital multimeter |
|---|---|
| Product color | Grey, White |
| Frequency range | 0.2 - 2 kHz |
| AC current range | 0.2 - 10 A |
| AC voltage range | 0.2 - 750 V |
| DC current range | 0.0002 - 10 A |
| DC voltage range | 0.2 - 1000 V |
| Resistance range | 200 - 100000000 Ω |
| Placement supported | Bench multimeter |
| Resistance resolution | 0.001 Ω |
| Resolution (frequency) | 0.0001 Hz |
| Resolution (AC current) | 100 µA |
| Resolution (DC current) | 1 µA |
| Resolution (DC voltage) | 1 mV |
| Basic accuracy (frequency) | 0.01% |
| Basic accuracy (DC current) | 0.02 + 0.005 |
| Basic accuracy (DC voltage) | 0.015 + 0.003 |
| Basic accuracy (resistance) | 0.02 + 0.003 |
| Display digits | 5.5 digits |
Weight and Dimensions| Depth | 297 mm |
|---|---|
| Width | 217 mm |
| Height | 88 mm |
| Weight | 2100 g |
Details safety precautions, warnings, and explains safety/electrical symbols used in the manual.
Covers detailed electrical characteristics, including voltage, resistance, current, frequency, continuity, and diode test.
Specifies input characteristics, resolution, and accuracy for DC voltage measurements.
Details AC voltage measurement parameters, including input characteristics, resolution, and accuracy.
Outlines specifications for resistance (2-wire/4-wire) measurement functions.
Provides DC current measurement parameters, including input characteristics, resolution, and accuracy.
Explains power considerations, selecting line voltage, and replacing line and current-input fuses.
Guides users on connecting the meter to line power and turning it on safely.
Guides on selecting functions like Voltage, Frequency, Resistance, Current, Diode, and Continuity.
Explains triggered measurements, trigger modes, external triggers, and function modifiers.
Details setting up the RS-232 interface, communication parameters, and print-only mode.
Lists and describes commands for common operations, functions, modifiers, range, queries, and configuration.
