32
Pinging a Single Device
From the main menu select Toolkit then Ping to
access NetTool’s ping function. You can ping one IP
address or a set (Ping Catalog) of addresses that you
define using NetTool Toolkit.
⇒ To ping a single device,
select Add New Device.
⇒ Enter the address and
press Select.
NetTool pings the device
and adds it to a running
list (up to 10) of recently
pinged devices. The IP
address pinged longest
ago will drop off the list
after the tenth address.
If you need to ping any
address again, simply
highlight it and press
Select.
afq41s.bmp
afq55s.bmp
afq56s.bmp
Ping Catalog
The Ping Catalog function enables you to use lists of IP
addresses grouped based on your network
configuration. You create the grouping using NetTool
Toolkit, the PC-based software that came with your
purchase. You can keep lists of common groups of IP
addresses (i.e., Marketing, Customer Support, First
Floor, etc.). Check out the online help for NetTool
Toolkit to learn how to set up and use the Ping List
feature.
To Next Page
Loading...
Need help?
General
