Fluke ScopeMeter 190 Series III - Resetting the Test Tool to Factory Settings

ScopeMeter
®
Test Tool
How to Use the Test Tool
7
Figure 1. Powering the Test Tool
Test Tool Reset
To reset the test tool to the factory settings:
1. Turn the test tool off.
2. Press and hold U.
3. Press and release O.
The test tool turns on. Wait to hear a double beep that indicates the reset is successful.
4. Release U.
3
2
1
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com