ScopeMeter
®
Test Tool
Memory and PC
51
Memory and PC
This section provides a step-by-step introduction to the general functions of the test tool that can
be used in the three main modes: Scope, Meter, or Recorder. You will find information on
computer communication at the end of this section.
USB Ports
The test tool is provided with two USB ports:
• USB-host port to connect an external flash memory drive (USB-stick) for data storage. The
maximum memory size is 32 GB.
• Mini-USB-B port to connect the test tool to a PC for remote control and data transfer under
PC-control, see FlukeView™ 2 Software.
The USB port is also used with the optional WiFi-USB Adapter as a wireless connection to a PC
that has FlukeView 2 software installed. See WiFi Connection.
The ports are fully isolated from the input channels and have a dust cover when not in use. See
Figure 31.
Figure 31. Test Tool USB Connections
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
