Fluke ScopeMeter 190 Series III - Test Tool Maintenance Procedures; General Maintenance and Safety Precautions; Storing the Test Tool and Batteries

190 Series III
Users Manual
78
Tilt Stand
The test tool is equipped with a tilt stand, allowing viewing from an angle while placed on a table.
See Figure 43.
Figure 43. Tilt Stand
Note
An optional Hanging Hook (Part Number HH290) attaches to the rear of the test tool. The
hook enables you to hang the test tool at a convenient viewing position, for example, a
cabinet door or a separation wall. See Figure 44.
Figure 44. Hanging Hook
A
B

Kensington
®
Lock Support
 Power Adapter Input
1
2
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com