ScopeMeter
®
Test Tool
Maintenance
85
Figure 46. Charging the Batteries
Alternatively, you may choose to exchange the battery (Fluke accessory BP290 or BP291) with a
fully charged one, and use the external battery charger EBC290 (optional Fluke accessory).
Battery Pack Replacement
XW Warning
To prevent possible electrical shock, fire, or personal injury, use only the Fluke
BP290 (not recommended for 190-xx4), BP291, or Fluke-recommended equivalent
for replacement.
When no adapter power is supplied, data not yet saved in the test tool memory is maintained if
the battery is replaced within 30 seconds. To avoid loss of data, do one of the following actions
before removing the battery:
• Store the data in the test tool (internal, non-volatile flash memory), on a computer, or a USB
flash drive.
• Connect the power adapter.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
