Fluke ScopeMeter 190 Series III - Navigating Test Tool Menus; Basic Menu Navigation and Selection

190 Series III
Users Manual
8
Menus
The Scope menu is the default menu when you turn on the test tool. The following example
shows how to use the menus to select a function.
To open the Scope menu and to choose an item:
1. Press
P to show the labels that define the present use for the four blue function keys
near the bottom of the screen.
2. Open the Waveform Options menu.
The menu shows at the bottom of the screen. Actual settings are shown on a yellow
background. Use the cursor to change the setting (black background) and confirm the
selection with E. See Figure 2.
Figure 2. Basic Navigation
3. Use the blue arrow keys to highlight the item.
4. Press E to accept the selection.
The next option will be selected. After the last option the menu will be closed.
Note
To exit the menu at any moment press CLOSE.
5. Press I to close a menu.
EEE
P
4
fg
h
i
3a
3a
1
2 3b 3b 3b
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com