Fluke ScopeMeter 190 Series III - FlukeView 2 Software Usage; Uploading Waveform Data to PC; Connecting Test Tool to PC

190 Series III
Users Manual
58
FlukeView™ 2 Software
With the FlukeView 2 software you can upload waveform data and screen bitmaps to your PC or
notebook computer for further processing.
After installation:
1. Start the FlukeView 2 software.
2. Push HELP to access the documentation for the program.
Computer Connection
To connect the test tool to a PC or notebook computer and use the FlukeView 2 software for
Windows
®
:
1. Use a USB-A to mini-USB-B interface cable to connect a computer to the mini USB PORT of
the test tool. See Figure 32.
The USB drivers automatically install. See USB Drivers.
2. Install the FlukeView 2 Demo version. For information about how to install and use the
software see the FlukeView 2 Users Manual.
The optional kit SCC293 contains an activation code to convert the FlukeView 2 Demo version
into a fully operational version. You can order the complete FlukeView 2 version with ordering
code FlukeView 2.
The test tool input channels are electrically isolated from the USB port. Remote control and data
transfer through the mini-USB port is not possible while saving or recalling data to or from the
USB-stick.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com