190 Series III
Users Manual
56
Recall a Setup Configuration
To recall a setup configuration:
1. Press
S to show the SAVE key labels.
2. Press 2 to open the RECALL menu.
3. Press 1 to select the source as internal memory (INT) or a USB device.
4. Use
h i
to highlight Setup.
5. Press E to accept your choice and jump to the filename field.
6. Use
h i
to select the file to be recalled.
7. Press E to recall the selected setup.
From this point you continue in the new operating configuration.
View Stored Screens
To scroll through the memories while looking at the stored screens:
1. Press
S to show the SAVE key labels.
2. Press 2 to open the RECALL menu.
3. Press 1 to select the source as internal memory (INT) or a USB device.
4. Press E to jump to the filename field.
5. Use
h i
to highlight a file.
6. Press 2 to view the screen and open the viewer.
7. Use
h i
to scroll through all stored screens.
8. Press 3 to save the screen to USB device (if connected) or internal memory.
9. Press 4 to exit the View mode.
Note
You cannot view the replay screens of a saved Record+Setup in VIEW mode. Only the
screen at the Save instant can be reviewed with this method. To see all replay screens,
recall them from memory with the RECALL option.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
Need help?
General
