190 Series III
Users Manual
86
To install or replace the battery pack:
1. Remove all probes and/or test leads.
2. Remove the standup or fold it to the test tool.
3. Unlock the battery cover. See Figure 47 .
4. Lift the tilt stand. See .
5. Lift the battery cover and remove it. See .
6. For replacement, lift one side of the battery and remove it. See .
7. Install a battery and close the battery cover.
Figure 47. Battery Pack Replacement
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
