Expert Series Thermal Imagers
Menus
13
Menus
Use the menus to change and view settings.
To change settings:
1. Push / to select an option.
2. Push to set the option.
The primary, secondary, and option menus close 10 seconds after the last push of a function
button. The option selection menu stays open until you make the selection, go up a menu
level, or cancel the action.
Table 8 lists the secondary menus.
Table 8. Primary Menu
Secondary Menu Description
Measurement
Set the calculation and display of radiometric temperat
ure measurement
data related to the thermal images.
Image
Set features used to show infrared images on the display and in some
saved image and video files.
Camera Set options for secondary camera features.
Memory Select to review and delete captured images and videos.
Fluke Connect
Select to pair the Imager to the Fluke Connect app on a mobile device or to
other Fluke Connect tools.
Settings Change user preferences and to view information about the Imager.
Note
The Fluke Connect system is not available in all countries.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
