Fluke TiX500 - Stream Live with Fluke Connect Software; Stream Live to an HDMI Device

TiX500, TiX520, TiX560, TiX580
Users Manual
42
3. Connect the USB A connector end of the cable into your PC and the USB Micro B
connector end into the Imager.
Note
Some Imagers have both A and Micro B connector jacks. Make sure to use the
Micro B jack on the Imager
appears on the SmartView software toolbar menu.
4. On the PC, choose Remote Display from .
To stream live to a PC, wirelessly:
1. On the Imager, turn on the WiFi Hotspot. See WiFi Hotspot.
2. On the PC:
a. From the networks screen, select Fluke-Camera.
Note
Fluke-Camera is the default name of the Imager. If you changed the name of the
Imager, select the new name of the Imager from the networks on the PC.
b. Open the SmartView software.
appears on the SmartView software toolbar menu.
c. Choose Remote Display from .
Stream Live with Fluke Connect Software
To stream live with Fluke Connect software, see Fluke Connect Wireless System.
Stream Live to an HDMI Device
HDMI (High-Definition Multimedia Interface) is a compact audio/video interface that transfers
uncompressed data and compressed/uncompressed digital audio data from the Imager to a
compatible HDMI device.
To stream live to an HDMI device:
1. Attach the included HDMI cable to the HDMI port on the Imager.
2. Connect the other end to an HDMI video device.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com