TiX500, TiX520, TiX560, TiX580
Users Manual
2
Safety Information
A Warning identifies hazardous conditions and procedures that are dangerous to the user. A
Caution identifies conditions and procedures that can cause damage to the Product or the
equipment under test.
Warning
To prevent possible electrical shock, fire, or personal injury and
for safe operation of the Product:
•
Read all safety information before you use the Product.
•
Carefully read all instructions.
•
Do not alter the Product and use only as specified, or the
protection supplied by the Product can be compromised.
•
Replace the batteries when the low battery indicator shows to
prevent incorrect measurements.
•
Do not use the Product if it operates incorrectly.
•
Do not use the Product if it is altered or damaged.
•
Disable the Product if it is damaged.
•
See emissivity information for actual temperatures. Reflective
objects result in lower than actual temperature measurements.
These objects pose a burn hazard.
•
Do not put battery cells and battery packs near heat or fire. Do not
put in sunlight.
•
Do not disassemble or crush battery cells and battery packs.
•
Remove batteries to prevent battery leakage and damage to the
Product if it is not used for an extended period.
•
Connect the battery charger to the mains power outlet before the
charger.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
